Leukoplast^® strong

1. Remove the protective film

Hold the plaster in one hand and peel off the upper protective film with thumb and index finger of the other.



2. Apply and remove the second protective film

Place the wound pad centrally on the wound. Make sure that you only touch the plaster on the protective film and the backside, never the wound pad itself. Remove the remaining protective film.



3. Smooth out and press

Smooth out the dressing so that it adheres evenly. Apply only slight pressure and avoid tension. To increase the adhesive strength, you can warm the dressing between the palms of your hands before applying it.

1. Cut to size

Cut off an appropriate length using a pair of clean, sharp scissors to prevent the shredding of edges and contamination.



2. Remove the protective film

Hold the strip in one hand and peel off the upper protective film with thumb and index finger of the other.



3. Apply and remove the second protective film

Place the wound pad centrally on the wound. Make sure that you only touch the plaster on the protective film and the backside, never the wound pad itself. Remove the remaining protective film.



4. Smooth out and press

Smooth out the dressing so that it adheres evenly. Apply only slight pressure and avoid tension. To increase the adhesive strength, you can warm the patch between the palms of your hands before applying it.

1. Phalanx

Remove the upper protective foil and place the wound pad centrally on the wound. Remove the second protective film. Smoothen down the adhesive surfaces.



2. Fingertip

Remove the upper protective foil, place the wound pad centrally on the wound and smooth the adhesive surfaces along the finger. Then remove the second protective film, fold the other half of the plaster over the fingertip and smooth down the remaining adhesive surfaces.



3. Knuckles

Remove the upper protective foil. Place the dressing on the knuckle so that the smaller cutout in the plaster points away from the body and the deep cutout towards the body. Remove the second protective foil and smoothen down.